Konica Minolta 211 Manuale Utente
Performing a Scan to E-mail operation
9
IC-206
9-49
3
Press the [,] or [+] key until “TX/RX RESULT” is selected.
–
If fax kit FK-506 is installed.
4
Press the [OK] key.
All communication results are displayed.
All communication results are displayed.
–
The communication results appear starting with the most recent
jobs. Press the [,] key to display communication results for older
jobs.
jobs. Press the [,] key to display communication results for older
jobs.
–
The NTP server can be specified if network interface card NC-503
or image controller IC-206 has been installed on the machine.
or image controller IC-206 has been installed on the machine.
–
The transmission results appear differently depending on whether
or not an NTP server has been specified.
or not an NTP server has been specified.
–
If an NTP server was specified:
The transmission number and transmission date and time appear
for data sent with the Scan to E-Mail or Scan to FTP operation.
The transmission number and transmission date and time appear
for data sent with the Scan to E-Mail or Scan to FTP operation.
–
If an NTP server was not specified:
Only the transmission number appears for data sent with the Scan
to E-Mail or Scan to FTP operation, but the transmission date and
time do not appear.
Only the transmission number appears for data sent with the Scan
to E-Mail or Scan to FTP operation, but the transmission date and
time do not appear.