Konica Minolta 211 Manuale Utente
Performing a Scan to Server (FTP) operation
10
IC-206
10-3
3
Press the [Speed Dial] key, and then use the keypad to type in the 3-
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).
–
When the destination address is entered, “OTHER SETTING=,”
appears. To change transmission settings for the file format and the
compression encoding method, press the [,] key. The “SCAN
OTHER SETTING” menu appears. For details on changing the
transmission settings, refer to “Changing the transmission settings”
on page 9-10.
appears. To change transmission settings for the file format and the
compression encoding method, press the [,] key. The “SCAN
OTHER SETTING” menu appears. For details on changing the
transmission settings, refer to “Changing the transmission settings”
on page 9-10.
–
Specify a speed dial number between 241 and 250.
–
If nothing is registered with the specified speed dial number, an er-
ror message appears. Enter the correct speed dial number.
ror message appears. Enter the correct speed dial number.
–
If the number was incorrectly entered, press the [Back] key, and
then type it in correctly.
then type it in correctly.
4
Press the [OK] key.
The destination appears.
5
Press the [Start] key.