Alcatel Carrier Internetworking Solutions 6300-24 Manuale Utente
Configuring the Switch
3-152
3
Command Attributes
• Port – Port identifier.
• Name
• Port – Port identifier.
• Name
1
– Name of ACL.
• Type – Type of ACL (IP or MAC).
• Precedence – IP Precedence value. (Range: 0-7)
• DSCP – Differentiated Services Code Point value. (Range: 0-63)
• 802.1p Priority – Class of Service value in the IEEE 802.1p priority tag.
• Precedence – IP Precedence value. (Range: 0-7)
• DSCP – Differentiated Services Code Point value. (Range: 0-63)
• 802.1p Priority – Class of Service value in the IEEE 802.1p priority tag.
(Range: 0-7; 7 is the highest priority)
1
For information on configuring ACLs, see page 3-61.
Web – Click Priority, ACL Marker. Select a port and an ACL rule. To specify a ToS
priority, mark the Precedence/DSCP* check box, select Precedence or DSCP* from
the scroll-down box, and enter a priority. To specify an 802.1p priority, mark the
802.1p Priority check box, and enter a priority. Then click Add.
priority, mark the Precedence/DSCP* check box, select Precedence or DSCP* from
the scroll-down box, and enter a priority. To specify an 802.1p priority, mark the
802.1p Priority check box, and enter a priority. Then click Add.
Figure 3-97. ACL Marker
CLI – This example changes the DSCP priority for packets matching an IP ACL rule,
and the 802.1p priority for packets matching a MAC ACL rule.
and the 802.1p priority for packets matching a MAC ACL rule.
Console(config)#interface ethernet 1/1
Console(config-if)#match access-list ip bill set dscp 0
Console(config-if)#match access-list mac mike set priority 0
Console(config-if)#end
Console#show marking
Console#show marking
Interface ethernet 1/1
match access-list IP bill set DSCP 0
match access-list MAC a set priority 0
match access-list IP bill set DSCP 0
match access-list MAC a set priority 0