Alcatel Carrier Internetworking Solutions 8008 Manuale Utente
Console Interface
2-22
Configuring the Switch
The Switch Configuration Menu is used to control a broad range of functions,
including port configuration, Spanning Tree support for redundant switches, port
mirroring, multicast filtering, and Virtual LANs. Each of the setup screens provided
by these configuration menus is described in the following sections.
including port configuration, Spanning Tree support for redundant switches, port
mirroring, multicast filtering, and Virtual LANs. Each of the setup screens provided
by these configuration menus is described in the following sections.
Alcatel OmniStack 8008
< Switch Configuration Menu >
Port Configuration
Extended Bridge Configuration
Port State
802.1P Configuration
Spanning Tree Configuration
802.1Q VLAN Base Information
Spanning Tree Information
802.1Q VLAN Current Table Information
Mirror Port Configuration
802.1Q VLAN Static Table Configuration
Port Trunking Configuration
802.1Q VLAN Port Configuration
IGMP Configuration
Port GARP Configuration
BStorm Control Configuration
Port GMRP Configuration
Port Security Configuration
<OK>
Use <TAB> or arrow keys to move. <Enter> to select.
Selection
Description
Port Configuration
Sets communication parameters for ports.
Port State
Displays current port settings and port status.
Spanning Tree
Configuration
Configures the switch and its ports to participate in a local Spanning Tree.
Spanning Tree
Information
Displays the current Spanning Tree configuration for the switch and its ports.
Mirror Port
Configuration
Sets the source and target ports for mirroring.
Port Trunking
Configuration
Specifies ports to group into aggregate trunks.
IGMP Configuration
Configures IGMP multicast filtering.
BStorm Control
Configuration
Allows you to enable/disable broadcast storm control on a per-port basis and
set the packet-per-second threshold.
Port Security
Configuration
Allows you to enable and configure port security for the switch.