Alcatel Carrier Internetworking Solutions 8008 Manuale Utente
Web Interface
3-30
VLAN Port Configuration
Use this screen to configure port-specific settings for IEEE 802.1Q VLAN features.
Parameter
Description
PVID
The VLAN ID assigned to untagged frames received on this port. Use the
PVID to assign ports to the same untagged VLAN.
Acceptable Frame
Type
1
This switch accepts “All” frame types, including VLAN tagged or VLAN
untagged frames. Note that all VLAN untagged frames received on this port
are assigned to the PVID for this port.
Ingress Filtering
1
If set to “True,” incoming frames for VLANs which do not include this port in
their member set will be discarded at the inbound port.
GVRP Status
2
Enables or disables GVRP for this port. When disabled, any GVRP packets
received on this port will be discarded and no GVRP registrations will be
propagated from other ports.
Note that, before this port setting takes effect, GVRP must be enabled for the
Note that, before this port setting takes effect, GVRP must be enabled for the
switch (see Configuring Bridge MIB Extensions on page 3-21).
GVRP Failed
Registrations
2
The total number of failed GVRP registrations, for any reason, on this port.
GVRP PDU Origin
2
The Source MAC Address of the last GVRP message received on this port.
1. This control does not affect VLAN independent BPDU frames, such as GVRP or STP. However, it does
affect VLAN dependent BPDU frames, such as GMRP.
2. GVRP is not available for the current firmware release.
2. GVRP is not available for the current firmware release.