AirLink Raven and PinPoint CDMA Manuale Utente
Raven and PinPoint CDMA User Guide Version 1.12
6. For "Connect using" select the COM port that the modem is on (do not select
a modem driver), then select OK.
7. Select 115200 for the "Bits per second." Ensure Data Bits: 8, Parity: None,
Stop bits: 1 and Flow control: Hardware. Then select OK.
(These are the factory default settings for a Raven CDMA modem. If you get
garbled characters when typing AT commands, change these settings and
(These are the factory default settings for a Raven CDMA modem. If you get
garbled characters when typing AT commands, change these settings and
reconnect to the modem. For example, change the baud rate to 57,600 bits per
second and connect again, etc.)
AirLink Communications, Inc.
Page 6
March 24, 2004