Allied Telesis AT-2711LX/LC Manuale Utente

Installing the Driver Software for Windows Systems

54

If your operating system detects the adapter card and installs a default 
driver, you need to update the driver software with the driver that you 
downloaded from the Allied Telesis website. To obtain the latest version of 
the AT-2711 series adapter driver, see “Downloading the Driver Software” 
on page 37. 

To update the driver software, you use the same procedure for installing 
the driver software for the first time. The only difference between updating 
and installing the driver software is the name of your adapter that Device 
Manager detects and lists.

Device Manager lists your adapter card as Allied Telesis AT-2711xXv2 
100Mb Fiber Ethernet once you installed the driver software. Before you 
installed the driver software, Device Manager lists your adapter as 
Ethernet Controller.

The procedures for installing the driver software are slightly different 
among Windows operating systems. To install the driver software on your 
system, follow one of the procedures below:







To update the driver software for your AT-2711 series adapter card, 
perform the following procedure:

1. Access the Device Manager. See “Accessing Device Manager on 

The Device Manager window pops up as shown in Figure 33 on page 
55.