Allied Telesis AT-2711LX/LC Manuale Utente
Configuring the Ethernet Interface for Linux Systems
62
Overview
The AT-2711 series adapters use a Linux inbox driver to operate. A driver
supplied with an operating system is called an inbox driver. Current Linux
systems come with the inbox driver that the AT-2711 series adapters
need.
supplied with an operating system is called an inbox driver. Current Linux
systems come with the inbox driver that the AT-2711 series adapters
need.
Since the driver software for the AT-2711 series adapters has already
been in place, you do not need to install it; however, the speed and duplex
mode are not automatically negotiated. You must disable Auto-negotiation
and sets these properties for the AT-2711 adapter interfaces manually. In
addition, you must set the same property values on the port interfaces of
the connected switch.
been in place, you do not need to install it; however, the speed and duplex
mode are not automatically negotiated. You must disable Auto-negotiation
and sets these properties for the AT-2711 adapter interfaces manually. In
addition, you must set the same property values on the port interfaces of
the connected switch.