ADC SG-1 Manuale Utente

7-22

[OAM]

Operation And Management mode

• on - Enable OAM mode

• off - Disable OAM mode

• on-cc - Enable OAM mode with continuity check

Example(s)

Each RADIUS server should be configured in the system. The radius-server command is used to configure the 
RADIUS server settings.

Usage

radius-server <host | key>

Parameter(s)

There are two options for the first command-line argument:

• host–to configure the RADIUS server host parameters (see 

 below)

• key–to define an alphanumeric string, which serves as a password for communicating with the 

RADIUS server

The host parameters include the IP address of the RADIUS server, the authentication port, the accounting port, and 
the type of RADIUS server. The default authentication port is 1645, and the default accounting port is 1646. The 
RADIUS server can be defined as one of three types.

• Merit

• Infovia

• Standard (default) 

Usage

To set the host parameters of the RADIUS server:

radius-server host <IP address> auth-port <port address> acct-port <port number> 

<m,i, or s> priority <radius priority><cr>

To set the RADIUS server key:

radius-server key <alphanumeric string> <cr>

Host(config)# atm pvc range 2 34 38 1 \ 2 \ 65 name arttt oam on ubr 120