ADC SG-1 Manuale Utente
A-1
A
Appendix
SG-1 V
ENDOR
-S
PECIFIC
A
TTRIBUTES
This appendix describes the vendor-specific attributes related to SG-1 EDS architecture.
O
VERVIEW
The vendor-specific attributes are based on RFC-2865 RADIUS recommendation. The first 4 octets are the vendor
id (supported vendor ID 2454, 2014). The next two octets are the vendor-type and length as recommended in the
RFC.
id (supported vendor ID 2454, 2014). The next two octets are the vendor-type and length as recommended in the
RFC.
The attributes are split into the following groups:
• User
• DHCP
• protocol
• service
• route
• vpdn
• qos
• DNS
Vendor-Specific Attributes Table
When the system sends a vendor-specific attribute to the radius, it sets the vendor type with the attribute internal
number, as specified below in the vendor-specific attribute list (
number, as specified below in the vendor-specific attribute list (
Table A-1. Vendor-Specific Attribute List
Num
Attribute Name
Attribute
Group
Attribute
Value (1 byte
which takes
value of
1 to 255)
First
Introduced
Description
1
accounting
user
10
V5.0
Allows defining the session
accounting operation mode and
methodology.
accounting operation mode and
methodology.
2
orig-name
user
12
V5.0
Contains the original user name as
received during PPP negotiation.
received during PPP negotiation.
3
auth-type
user
13
V5.0
Contains the authentication type of
the Access Request message. It
provides the RADIUS with additional
information regarding the purpose of
the authentication.
the Access Request message. It
provides the RADIUS with additional
information regarding the purpose of
the authentication.
4
action
user
14
V5.0
Defines the action that should be
taken by the system.
taken by the system.
5
SSC-host
user
15
V5.0
Contains the SSC (Service
Selection Center) host IP address at
which the user activated the service.
Selection Center) host IP address at
which the user activated the service.