ADC SG-1 Manuale Utente

6-21

Use this command to display the configured Virtual Router Redundancy Protocol (VRRP) status on the specified 
interfaces.

Usage

show vrrp interface (<ethernet>|<vlan>) <slot number> <port number> <number>

Parameter(s)

(<ethernet>|<vlan>)

The interface will be either an Ethernet or VLAN interface.

<slot number>

Slot number; valid values are 0 to 3.

<port number>

Defines the port; valid values are 1 or 2.

<number>

Defines the Virtual Router ID number (VRID); valid values are 1 to 15.

Example(s)

For the master:

Host> show vrrp interface Ethernet 0\1

 Ethernet 0\1 - Group 1

 State is Master

 Virtual IP address is 192.168.1.1

 Master router is 192.168.1.2 (local)

 Virtual MAC address is 00-00-5E-00-01-01

 Advertisement interval is 1 seconds

 Priority 254

 Preemption mode: off

Host>