ADC ACE-142S/142V Manuale Utente
ADCP-96-015 • Issue 1 • July 2004
Page 42
© 2004, ADC Telecommunications, Inc.
© 2004, ADC Telecommunications, Inc.
9
CONNECTOR PANEL INSTALLATION
The ACE-142S/142V cabinet can accommodate up to five 72-port connector panels which will
provide a total of 360 distribution ports. If the cabinet is not pre-loaded with five connector
panels, then additional connector panels and round splice trays may be installed as needed. Use
the following procedure to install additional connector panels in the cabinet:
provide a total of 360 distribution ports. If the cabinet is not pre-loaded with five connector
panels, then additional connector panels and round splice trays may be installed as needed. Use
the following procedure to install additional connector panels in the cabinet:
1. Position the connector panel in the next available mounting space within the cabinet as
.
2. Secure the connector panel to the cabinet using the four machine screws provided.
Figure 34. Connector Panel Installation
19737-A