ADC Campus-REX RS Interface Card Manuale Utente
Set Up the Campus-REX System
3-8
Campus-REX RS Interface Card User Manual
Using the LCD
The steps in this section use the menu buttons and LCD on the front of the
Desktop Unit or the Campus-Star Campus Management Unit (CMU). The
figure below shows the LCD and menu buttons on the Campus-RS Desktop
Unit. See the Campus-Star User Manual for the location of the LCD and
menu buttons on the CMU. For a complete description of how to use the menu
buttons and LCD, see
Desktop Unit or the Campus-Star Campus Management Unit (CMU). The
figure below shows the LCD and menu buttons on the Campus-RS Desktop
Unit. See the Campus-Star User Manual for the location of the LCD and
menu buttons on the CMU. For a complete description of how to use the menu
buttons and LCD, see
To set the HDSL Transmission Rate:
1
Press Escape until
Campus RS I/F: REX
displays.
2
Press Next.
HDSL LINK CONFIG & STATUS
displays.
3
Press Enter.
OPERATING MODE
displays.
4
Continue with one of the following sections, depending on whether you
are using Standard Mode (
are using Standard Mode (
), Extended Mode (
), or
AutoSync Mode (
).
Standard HDSL Mode
in the previous section to set a Standard
Mode HDSL Rate.
Choose from the following settings:
•
T1
•
E1
•
768
Next
Enter
Escape
C AMPUS RS
HDSL
Test
Port
LCD
Menu buttons
CAD1069i5.book Page 8 Thursday, May 30, 2002 7:32 AM