Cisco Systems Cisco 12816 Manuale Utente

Chapter 6 Router Field Diagnostics

diag Command Output Examples

6-16

Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide

OL-11495-01

FDIAG_STAT_IN_PROGRESS(7): test #25 TBM to RX SOP Packet - 4302

Terminal Loopback

FDIAG_STAT_IN_PROGRESS(7): test #26 TBM to RX SOP Packet - Framer

System Bus Loop

FDIAG_STAT_IN_PROGRESS(7): test #27 RBM to TBM Fabric Packet Loopback

FDIAG_STAT_IN_PROGRESS(7): test #28 TBM to RBM Packet, RBM page

crossing

FDIAG_STAT_IN_PROGRESS(7): test #29 TBM to TX SOP Packet Simultaneous

FDIAG_STAT_IN_PROGRESS(7): test #30 TBM to PSA Multicast Packets -

Framer Loopbac

FDIAG_STAT_DONE(7)

FD 7> Changed current_status to FDIAG_STAT_IDLE

Field Diagnostic ****PASSED**** for slot 7

Field Diag eeprom values: run 62 fail mode 0 (PASS) slot 7

last test failed was 0, error code 0

Shutting down diags in slot 7

Board will reload

Displaying Previous Test Results

The following example shows the previous test results of a line card in slot 7.
Diagnostics had been run 64 times on this line card. Because the board PASSED
the last field diagnostics session, the fail mode was 0, and the last test that failed
was 0.

Router # diag 7 prev

Field Diag eeprom values: run 64 fail mode 0 (PASS) slot 7

last test failed was 0, error code 0