Cisco Systems Cisco 831 Manuale Utente

Perform the following steps to mount the router on the wall:

Secure two screws 7 5/8 inches (19.35 cm) apart into a wall and 1/8 inch (0.32 cm) 
from the wall. 

Hang the router on the screws as shown in Figure 2-9.

Place the power supply on a horizontal surface.

The router has been configured to work for the most common type of installation. 
Log on to a PC that is connected to the router, open a web browser, and connect 
to a website. If you connected to a website, you have completed setup and can 
continue to use the router. 

If you cannot display a website, make sure that the broadband modem or Ethernet 
switch that the router is connected to is operating, and try again. If you still cannot 
connect to a website, you must follow the steps in the 

Two number-six, 3/4 in. 
screws 

Maximum distance between the 
router and the power supply (6 ft 
[1.8m])

Distance between the two 
screws on the wall 
(7 5/8 in. [19.35 cm])

Horizontal surface on which to 
place the power supply

Cisco 831 router

Distance between the screw and 
the wall (1/8 in. [0.32 cm])

Mounting brackets