Cisco Systems WRVS4400NRF Manuale Utente
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the VPN Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
108
5
Configuring IPSec VPN
The VPN > IPSec VPN window displays settings for configuring a VPN tunnel.
Virtual Private Network (VPN) is a security measure that creates a secure
connection between two remote locations. Configure these settings so that the
gateway creates VPN tunnels.
connection between two remote locations. Configure these settings so that the
gateway creates VPN tunnels.
To configure the VPN Gateway to create VPN tunnels, follow these steps:
STEP 1
Click VPN > IPSec VPN.
STEP 2
Configure the gateway to create the VPN tunnels:
•
Select Tunnel Entry
—Select a tunnel to configure.
•
Delete
—Deletes all settings for the selected tunnel.
•
Summary
—Shows the settings and status of all enabled tunnels.
•
IPSec VPN Tunnel
—Click Enable option to enable this tunnel.
•
Tunnel Name
—Enter a name for this tunnel, such as “LA Office.”