Cisco Systems WRVS4400NRF Manuale Utente
Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring the VPN Settings
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
111
5
Setting Up and Configuring Remote Groups
The Remote Group Setup section of the VPN > IPSec VPN window displays
settings for configuring the remote groups of VPN tunnel connections.
settings for configuring the remote groups of VPN tunnel connections.
To set up and configure a remote group, follow these steps:
STEP 1
Click VPN > IPSec VPN.
STEP 2
Configure Remote Group Setup settings.
•
Remote Security Gateway Type
—There are two types. They are IP Only, IP
+ Domain Name (FQDN) Authentication. The type of Remote Security
Gateway should match with the Local Security Gateway Type of VPN
devices in the other end of tunnel.
Gateway should match with the Local Security Gateway Type of VPN
devices in the other end of tunnel.