Cisco Systems WRVS4400NRF Manuale Utente

Front Panel

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide

19

 

The LEDs are located on the front panel of the router.

—Lights up green to indicate the router is powered on. The LED 

flashes when the router is running a diagnostic test.

—If this light is off, the system is ready. The Diag LED blinks red 

during firmware upgrades.

—The IPS LED lights up when the Intrusion Prevention System (IPS) 

function is enabled. If the LED is off, then IPS functions are disabled. The IPS 
LED flashes green when an external attack is detected. It flashes red when an 
internal attack is detected.

—The WIRELESS LED lights up when the wireless module is 

enabled. The LED is off when the wireless module is disabled. The WIRELESS 
LED flashes green when the data is transmitting or receiving on the wireless 
module.

—For each LAN port, there are three LEDs. If a port 

LED is continuously lit green, the router is connected to a device at the speed 
indicated through the corresponding port (1, 2, 3, or 4). The LED flashes green 
when a router is actively sending or receiving data on that port.

—The Internet LED lights up green to indicate the line speed of 

the device attached to the Internet port. If the router is connected to a cable or 
DSL modem, typically the 100 LED will be the only LED lit up, indicating 
100 Mbps. Flashing indicates activity.