Cisco Systems WRVS4400NRF Manuale Utente

Setting Up Your Wireless-N Router

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide

44

 

If your ISP is DSL-based and uses Point-to-Point Protocol over Ethernet (PPPoE) to 
establish Internet connections, select PPPoE from the Internet Connection Type 
drop-down menu to enable it, and do the following:

•

—Enter the user name and password provided 

by your ISP for PPPoE authentication.

•

—Configure the router to cut the 

Internet connection after it has been inactive for a specified period of time 
(Max Idle Time). If your Internet connection has been terminated due to 
inactivity, Connect on Demand enables the router to automatically re-
establish your connection as soon as you attempt to access the Internet 
again. If you wish to activate Connect on Demand, click the Connect on 
Demand

 option and enter the number of minutes you want to have elapsed 

before your Internet connection terminates in the Max Idle Time field. Use 
this option to minimize your DSL connection time if it is charged based on 
time. This option is disabled by default.

•

—Allows the router to periodically check your 

Internet connection. If you are disconnected, the router automatically 
reestablishes your connection. To use this option, click the option next to 
Keep Alive

. In the Redial Period field, you specify how often you want the 

router to check the Internet connection. This option is enabled by default