Cisco Systems WRVS4400NRF Manuale Utente

Setting Up and Configuring the WRVS4400N Wireless-N Router

Configuring Wireless Settings

Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide

Configuring Wireless Security

The Wireless > Wireless Security window allows you to configure the wireless
router’s wireless security settings.

To change the router’s wireless security settings, follow these steps:

STEP 1

Click Wireless > Wireless Security.

STEP 2

Configure the wireless security settings for Wireless Isolation:

•

Wireless Isolation (between SSID w/o VLAN)

—Prevents wireless

personal computers that are associated to the same network name (SSID)
from seeing, or transferring files between, each other.

Enable

this feature to prevent Wireless personal computers from seeing

each other.

Disable

this feature to allow wireless personal computers to see each other

and to exchange files between themselves.

This feature is very useful when setting up a wireless hotspot location. The
default is Disable.

STEP 3

Select the wireless security mode you want to use, WEP, WPA-Personal, WPA2-
Personal

, WPA2-Personal Mixed, WPA-Enterprise, WPA2-Enterprise, or

WPA2-Enterprise Mixed

. (WPA stands for Wi-Fi Protected Access, which is a

security standard stronger than WEP encryption and forward compatible with IEEE
802.11e. WEP stands for Wired Equivalent Privacy, Enterprise refers to using
RADIUS server for authentication, while RADIUS stands for Remote Authentication
Dial-In User Service.) Refer to the appropriate instructions below after you select
the Authentication Type and SSID Interoperability settings.