Cisco Systems 2500 SERIES Manuale Utente

Snapshot button

Captures and saves a snapshot image of the current video image in the format and 
location of your choice, and with the file name of your choice.

When you click this button, follow these steps to save the image:

In the Snapshot window, click Save.

In the Save Picture As window, enter the path and folder for the image, the file 
name for the image, and the format (BMP or JPG) for the image, then click 
Save.

Speaker Off 
toggle button

Click the Speaker Off button to mute audio that is sent from the IP camera to the 
PC that you are using. The button changes to the Speaker On button. Click the 
Speaker On button to unmute audio. The button changes to the Speaker Off button.

These buttons appear if audio is enabled for the IP camera. For information about 
enabling audio, see the 

.

Speaker On 
toggle button

Speaker Volume 
slider

Appears to the right of the Speaker On or Speaker Off button if audio is enabled for 
the IP camera. When the speaker is unmuted, use this slider to adjust the volume at 
which your PC speakers play the audio from the IP camera.

For information about enabling audio, see the 

.

Microphone Off 
toggle button

Click the Microphone Off button to mute the audio stream that is captured and sent 
to the IP camera from the internal or external microphone of the PC that you are 
using. When you click this button, the speaker that is attached to the IP camera does 
not play audio that is transmitted from your PC.

If you are simultaneously accessing other IP cameras in different browser 
sessions on the same PC, clicking this button in one browser session does 
not mute the audio that the PC sends to the other IP cameras.

When you click the Microphone Off button, it changes to the Microphone On 
button. Click the Microphone On button to unmute audio that is sent to the IP 
camera. The button changes to the Microphone Off button.

These buttons appear if half-duplex or full-duplex is enabled for audio. For 
information about enabling half-duplex or full-duplex, see the 

.

Microphone On 
toggle button

Microphone 
Sensitivity slider

Appears to the right of the Microphone On button or Microphone Off button if audio 
is enabled for the IP camera. Use this slider to adjust the gain of the PC microphone 
(that is, how sensitive it is to the audio that it picks up and that is sent to the IP 
camera).