Actiontec electronic GT704WR Manuale Utente
40
Actiontec 54 Mbps Wireless Cable/DSL Router User Manual
41
Chapter 4 Using Advanced Setup
Remote Management
Selecting Remote Management in the “Advanced Configuration” screen gener-
ates the “Remote Management” screen. Remote Management allows access to the
Router through the Internet via another computer. Actiontec recommends leaving
the Remote Management Off (the factory default setting).
ates the “Remote Management” screen. Remote Management allows access to the
Router through the Internet via another computer. Actiontec recommends leaving
the Remote Management Off (the factory default setting).
To access the Router from the Internet, activate Remote Management by selecting
On and writing down the
On and writing down the
WAN IP
address of the Router (see “
WAN IP
Address” on
page
29
). On a computer outside of the network, open a Web browser and enter
the Router’s
WAN IP
address in the address text box. The Router’s Main Menu (or a
password prompt, if a password has been set) appears in the browser window.
☞
Note: Before Remote Management can be activated, the admin-
istrator password must be set. To do this, go to the Setup screen
and select Change Admin Password. Follow the instructions in
the subsequent screens.
and select Change Admin Password. Follow the instructions in
the subsequent screens.