D-Link DIR-635 Manuale Utente

5

D-Link DIR-635 User Manual

Section 3 - Configuration

Check  the  box  to  enable  the  wireless  function.  If  you  do  not 

want to use wireless, uncheck the box to disable all the wireless 

functions.

Service Set Identifier (SSID) is the name of your wireless network. 

Create a name using up to 32 characters. The SSID is case-

sensitive.

The 

Auto  Channel  Scan  setting  can  be  selected  to  allow 

the  DIR-635  to  choose  the  channel  with  the  least  amount  of 

interference.

Indicates  the  channel  setting  for  the  DIR-635.  By  default  the 

channel  is  set  to  6.  The  Channel  can  be  changed  to  fit  the 

channel setting for an existing wireless network or to customize 

the wireless network. If you enable 

Auto Channel Scan, this 

option will be greyed out.

Select one of the following:

802.11g  Only  -  Select  if  all  of  your  wireless  clients  are 

802.11g.

Mixed 802.11g and 802.11b - Select if you are using both 802.11b and 802.11g wireless clients.

802.11b Only - Select if all of your wireless clients are 802.11b.

802.11n Only - Select only if all of your wireless clients are 802.11n.

Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

Select the Channel Width:

40MHz - Select if you are using all 802.11n devices for maximum performance.

Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.

20MHz - Select if you are not using any 802.11n wireless clients.

Select the transmit rate. It is strongly suggested to select 

Best (Auto) for best performance.