D-Link DIR-635 Manuale Utente

Pagina di 86
3
D-Link DIR-635 User Manual
Section 3 - Configuration
QoS Engine
This option is disabled by default. Enable this 
option for better performance and experience with 
online games and other interactive applications, 
such as VoIP.
This option should be enabled when you have a 
slow Internet uplink. It helps to reduce the impact 
that large low priority network packets can have 
on more urgent ones.
This option is enabled by default when the QoS 
Engine option is enabled. This option will allow 
your router to automatically determine the uplink 
speed of your Internet connection.
This displays the detected uplink speed.
The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISP’s often speed 
as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can 
test your uplink speed with a service such as www.dslreports.com.
By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some 
other connection type (such as cable modem or Ethernet), and it displays the result as Detected xDSL or Frame Relay Network. 
If you have an unusual network connection in which you are actually connected via xDSL but for which you configure either 
“Static” or “DHCP” in the Internet settings, setting this option to xDSL or Other Frame Relay Network ensures that the router 
will recognize that it needs to shape traffic slightly differently in order to give the best performance. Choosing xDSL or Other 
Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but 
gives much better results. 
When Connection Type is set to automatic, the automatically detected connection type is displayed here.
Enable 
StreamEngine:
Dynamic 
Fragmentation:
Automatic Uplink 
Speed:
Measured Uplink 
Speed:
Manual Uplink 
Speed:
Connection Type:
Detected xDSL:
The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the 
QoS Engine settings are disabled and application priority is not classified automatically.