Compatible Systems DS3-10/100 Manuale Utente

TB:  Use configure and set the Numbered and Net keywords in the IPX WAN 0 section.

The settings above are all that is generally required for IPX operation over Frame Relay.

Frame Relay operation requires that the WAN interface be set as a “numbered interface.”  This 
means that the interface (and thus the Frame Relay network) must have an AppleTalk network 
number and the interface must have an AppleTalk node number.

•

AppleTalk numbered interface

•

AppleTalk network number

•

AppleTalk node number

•

AppleTalk zone name

CV:  Use the AppleTalk Routing: WAN Dialog Box.

TB:  Use configure and set the Numbered, NetLower, and DefZone keywords in the Apple-
Talk WAN 0 section.

The settings above are all that is generally required for AppleTalk operation over Frame Relay.

In order to be used, DECnet must be turned on both globally and for a particular port. 

WAN interfaces which are set for Frame Relay operation do not need any additional parame-
ters set in order to function.

•

Set DECnet on (globally, and for this port)

CV:  Use the DECnet Routing Dialog Box (under Global/DECnet Routing) and the DECnet: 
WAN Dialog Box.

TB:  Use configure and set the Mode keyword in the DECnet WAN 0 section.

v Note: Setting DECnet on for any port with the command line also sets DECnet on globally.  
In CompatiView you must set a global parameter and a port-specific parameter.