Compatible Systems 3500R Manuale Utente

Install the rack-mount ears on the sides of the case towards the front 
using the screws provided.  Position the ears so that they are flush with 
the front of the case.  The slotted holes in the ears will mate with the 
mounting holes in a standard 19" rack.

v Note: The RISC Router 3500R is 1U high when its bottom-mounted 
rubber feet are removed.  If you intend to mount the unit in a 1U space, 
make sure your equipment rack is well ventilated.  Otherwise, thermal 
problems may occur.

Install the rack-mount ears using the mounting holes midway along the 
sides of the case, using the screws provided.  The slotted holes in the 
ears will mate with the mounting holes in a standard 19" rack.

Install the rack-mount ears on the middle of the case, using the screws 
provided.  Position the ears so that they are flush with the bottom of the 
case.  The slotted holes in the ears will mate with wood screws or other 
attachment methods.

v Note: Wood screws are not provided with the rack-mount kit.

For thick Ethernet networks, you should have installed your Ethernet 
cabling before you install the RISC Router 3500R.

If you are installing a twisted-pair connection, and the twisted-pair hub 
is already in place, you can connect the router to an active network 
without interrupting network activity.

To connect the router to a thick Ethernet network, simply plug one end 
of a transceiver cable into the DB-15 transceiver connector located on 
the back panel of the unit.  Then, plug the other end of the transceiver 
cable into the transceiver which should already be attached to the thick 
Ethernet cable.

Before connecting the router to twisted-pair cabling you need an 
unshielded twisted-pair cable that is already connected to your 
10BaseT-compatible twisted-pair hub.