Compatible Systems 3500R Manuale Utente

Outgoing dial-on-demand requires some additional information.

•

Set dialing method

•

Create dial-out script

•

Set dial-out script to be used

•

Set inactivity time

CV:   Use the Link Configuration: WAN 1 Dialog Box to set the dialing 

method and to select a chat script (once you have created one).  
Use the WAN Chat Scripts Dialog Box (under Global/WAN Chat 
Scripts) to create your chat script.

TB:   Use configure and then set the Dialing, DialOutScript, and 

DropInact keywords in the Link Config WAN 0 (and/or other 
port numbers you wish to configure) section. Use edit config and 
create a Chat section to contain your dialing script.

WAN interfaces which are set for PPP operation do not generally use an 
IP address.  They are set to act as an "unnumbered interface."  In this 
mode of operation, there are no required settings.

These parameters help supply information about the segment that the 
interface is connected to.  With this information, routing can take place.  

•

Set IP RIP 1, IP RIP 2, OSPF (Open Shortest Path First) or BGP 
(Border Gateway Protocol)

•

Set IP static routes

CV:   Use the TCP/IP Routing: WAN Dialog Box to set RIP, and the IP 

Static Routing Dialog Box (under Global/IP Static Routes) to set 
static routes.  OSPF and BGP can only be configured using text-
based configuration.

TB:   Use configure and set the RIPversion keyword in the IP WAN 0  

(and/or other port numbers you wish to configure) section. Use 
edit config and add static routes in the IP Static section.

v 

 If you set RIP to “on” for a dial-on-demand link, you must