Manualsbrain.com
  1. Manuali
  2. Marche
  3. Compatible Systems
  4. 3500R
  5. Manuale Utente

Compatible Systems 3500R Manuale Utente

Scarica
Pagina di 49
 
Chapter 6 - Basic Configuration Guide
29
Suggested for IP
These parameters help supply information about the segment that the 
interface is connected to.  With this information, routing can take place.  
•
Set IP RIP 1, IP RIP 2, OSPF (Open Shortest Path First) or BGP 
(Border Gateway Protocol)
•
IP static routes
CV:   Use the TCP/IP Routing: WAN Dialog Box to set RIP, and the IP 
Static Routing Dialog Box (under Global/IP Static Routes) to set 
static routes.  OSPF and BGP can only be configured using text-
based configuration.
TB:   Use configure and set either the RIPVersion keyword or the 
OSPFEnabled keyword in the IP WAN 0 (and/or other port 
numbers you wish to configure) section.  Add static routes and a 
default router using the edit config IP Static command.
v 
Note:
 Due to the complexity of BGP, configuration parameters for 
BGP are not given here.  Compatible Systems has posted a BGP config-
uration guide in the Technical Support section of our Web site at: http://
www.compatible.com/.
IPX Protocol
Required for IPX
Frame Relay operation requires that the WAN interface is set to be a 
"numbered interface."  This means that the interface (and thus the 
Frame Relay network) must have an IPX network number.
•
IPX numbered interface
•
IPX network number
CV:   Use the IPX Routing: WAN Dialog Box.
TB:   Use configure and set the Numbered and Net keywords in the 
IPX WAN 0 (and/or other port numbers you wish to configure) 
section.
Suggested for IPX
The settings above are all that is generally required for IPX operation 
over Frame Relay.