Compatible Systems 900i Manuale Utente

Pagina di 44
 
Chapter 1 - Introduction
1
Chapter 1 - Introduction
About the MicroRouter 900i
Congratulations on your purchase of the MicroRouter 900i Ethernet to 
Internet router.  The MicroRouter 900i supports the IP protocol, with 
dial-on-demand or dedicated operation over voice, leased/switched 56, 
or ISDN lines, using the PPP or the Frame Relay wide area protocols.
A Note About On-Demand Internetworking
The MicrRouter 900i can be configured to provide cost effective 
on-demand connections over a wide area communications link (typi-
cally a voice phone line, a switched 56 line, or an ISDN line).  Your 
network traffic and the configuration you place in the router will deter-
mine how often and for how long such a link is connected.
THE SHIPPING CONFIGURATION IN YOUR MICROROUTER 
900i DOES NOT PROVIDE AUTOMATIC ON-DEMAND INTER-
NETWORKING.  YOU MUST FIRST PROGRAM YOUR ROUTER 
TO WORK IN THIS ROLE ON YOUR NETWORK.
YOU SHOULD CAREFULLY MONITOR PHONE LINE USAGE TO 
BE SURE THAT YOUR ROUTER CONFIGURATION IS 
ALLOWING THE ROUTER TO DROP THE COMMUNICATIONS 
LINK WHEN IT ISN’T NEEDED.
MicroRouter 900i Installation Overview
This manual will help you install the MicroRouter 900i to a local 
Ethernet to a remote network and/or PPP client computer. This connec-
tion can be made to other Compatible Systems routers, routers from 
other vendors, or PPP compliant dial-in software packages running on a 
variety of computers. The wide-area interface on the MicroRouter 900i 
may be used to interconnect your network with other corporate 
networks, and to make your network’s resources available to dial-in 
clients. You can also use the MicroRouter 900i as an IP only router in 
non-Internet applications.