Compatible Systems T1-10/100 Manuale Utente

Some of the LEDs on the front of the VSR multigigabit switching router serve dual functions.  
In addition to indicating certain router-wide operating conditions, they may also display port-
specific information.   

v Note: Any continuous flashing pattern not noted in this chapter may be caused by a hard-
ware failure.  Please call Compatible Systems Technical Support if your router shows a hard-
ware failure.

The following LEDs and light patterns provide information about the VSR’s physical state and 
operating conditions.

The router is above the proper operating temperature.  The filter needs changing.  See the 
appropriate VSR chassis section of the manual for instructions.

The router booted properly without detecting any failures.

5 flashing

1 flashing

Router stacks starting up.

3&4 flashing

2&3 flashing

 No OS loaded. Running from ROM.

1&4 flashing

2&5 flashing

Erasing OS in Flash ROM.

5 flashing

1,2&3 flashing

Erasing config in Flash ROM.

1 - 5 scanning

5 - 1 scanning

 Flash ROM erase due to switch set-

ting five or six is complete. Set 

switch to zero and cycle power.