Compatible Systems 5.4 Manuale Utente

Pagina di 313
Chapter 6 - VPN Ports and LAN-to-LAN Tunnels
103
Enable Encryption
This checkbox controls whether all tunnel traffic will be encrypted. 
If checked, each packet will be digitally scrambled before sending. The 
receiving end of the tunnel will unscramble the data using a shared key 
before allowing the traffic onto its local network.
Encryption Method
This pull-down menu allows an encryption method to be specified. 
If None is selected, the tunnel session will be sent in the clear in both 
directions.
If Fixed is selected, Personal Level Encryption will be used to scramble 
the data using a fixed key. 
If PLE is selected, Personal Level Encryption will be used to scramble 
the data using a key generated from the encryption secret.
If DES56 is selected, the DES algorithm will be used. DES provides 
better security than PLE, but also requires more time to operate. 
If 3DES is selected, the Triple DES algorithm will be used. In Triple 
DES, the data is processed three times, each time with a different 56-bit 
key. 
v Note:  Some VPN devices may not allow 3DES as an option. 
Encryption Secret
This secret is used to generate session keys which are used to encrypt/decrypt 
each packet received from or sent through the tunnel. The secret can be from 
1 to 255 characters in length.
v Note:  PLEDES56 and 3DES all require that the same Encryption 
Secret
 be configured for each end of the tunnel.
Interoperability Settings Dialog Box
This dialog box enables the IntraPort to interoperate with other vendors’ 
devices. If the remote Tunnel Partner is a Compatible Systems device, it is not 
necessary to configure these settings. Interoperability settings are individu-
ally set for each tunnel partner.