Compatible Systems 5.4 Manuale Utente

This sets the IP address (e.g., 192.168.9.99) or fully qualified domain name 
(e.g., monkeywrench.com) of the secondary LDAP server which contains the 
configuration. 

This string is used to authenticate the device to the secondary LDAP server. 
If this is not set, then the device will attempt an anonymous bid to the server. 
The Secondary Password may be up to 32 characters long.

This specifies the portion of the LDAP tree where the configuration is 
located.

This string specifies the relative distinguished name used in the LDAP server 
to identify the entry which contains the configuration.

This value is the number of seconds the device will wait for a response from 
the LDAP server.

This value specifies which configurations take precedence. When new 
configurations are added, the device’s configuration is rebuilt to include the 
one that was just added. 

If a new configuration contains a section which contains a higher priority than 
one already in place, The new configuration (or configuration portion) is 
added above the one that is already there. This enables higher priority sections 
to take precedence.