Compatible Systems 5.4 Manuale Utente

TCP/IP Routing: Bridge 0 Configuration Dialog Box

v Note:  If you need more information about the IP protocol, see “IP 101” in 
the Appendices to this manual.

To access this dialog box, select Bridge 0/TCP/IP Routing from the Device 
View. 

These radio buttons control whether IP packets received by a member inter-
face of the IP Bridge Group are passed on for IP routing.

•

If set to IP Routing, then IP packets received on a member interface of 
the IP Bridge Group which cannot simply be bridged to another member 
interface of the group are passed on for IP routing.

•

If set to IP Off, then IP packets received on a member interface of the IP 
Bridge Group which cannot be bridged to another member interface of 
the group are dropped. This setting means that further IP configuration 
information is not required for the IP Bridge Group.

Every network interface (including a logical interface, like the IP Bridge 
Group) on an IP internetwork must have a unique IP address that identifies 
that interface to other devices on the internetwork. Part of this address iden-
tifies the network segment(s) the IP Bridge Group is connected to, and the 
remainder uniquely identifies the IP Bridge Group itself.