Compatible Systems 5.4 Manuale Utente
Chapter 2 - IP Routing & Bridging
55
•
Type 2 is the external cost, regardless of the interior cost to reach that
route.
route.
•
The Metric parameter sets the external cost to be used. The value can be
a number between 1 and 32,767. For a type 1 route, the internal costs
along the routing path will be added to this cost to get the total cost.
a number between 1 and 32,767. For a type 1 route, the internal costs
along the routing path will be added to this cost to get the total cost.
Default into OSPF
This checkbox sets whether the router will redistribute default routes into
OSPF. If left unchecked, a RIP or BGP default route will not be advertised
into the OSPF domain even if non-default routes from that protocol are being
redistributed.
OSPF. If left unchecked, a RIP or BGP default route will not be advertised
into the OSPF domain even if non-default routes from that protocol are being
redistributed.
•
Type 1 is the sum of both the external cost and the internal cost used to
reach that route.
reach that route.
•
Type 2 is the external cost, regardless of the interior cost to reach that
route.
route.
•
The Metric parameter sets the external cost to be used. The value can be
a number between 1 and 32,767. For a type 1 route, the internal costs
along the routing path will be added to this cost to get the total cost.
a number between 1 and 32,767. For a type 1 route, the internal costs
along the routing path will be added to this cost to get the total cost.
OSPF to RIP
This checkbox sets whether the router will redistribute OSPF routes in RIP.
If checked, RIP will pick up the OSPF routes along with any other routes it is
going to advertise.
If checked, RIP will pick up the OSPF routes along with any other routes it is
going to advertise.
BGP to OSPF
This checkbox sets whether the router will redistribute BGP routes into the
OSPF routing domain.
OSPF routing domain.
v Note: The full Internet BGP routing table cannot be redistributed into
OSPF. Only up to 1,000 BGP routes will be accepted.
OSPF. Only up to 1,000 BGP routes will be accepted.
BGP to RIP
This checkbox sets whether the router will redistribute BGP routes into RIP.
If checked, RIP will pick up the BGP routes along with any other routes it is
going to advertise.
If checked, RIP will pick up the BGP routes along with any other routes it is
going to advertise.
RIP to BGP
This checkbox sets whether the router will redistribute RIP routes into the
BGP routing domain.
BGP routing domain.
OSPF to BGP
This checkbox sets whether the router will redistribute OSPF routes into the
BGP routing domain.
BGP routing domain.