Linksys E-4200 Manuale Utente

Maintaining and Monitoring

Linksys E-Series

1.  With your router connected to power and turned on, press and hold the 

Reset button on the bottom of your router for 5-10 seconds 

1.  Log into the browser-based utility (see “How to open the browser-based 

utility” on page 21)  

2.  Click the Administration tab, then click the Factory Defaults page 

3.  Click Restore Factory Defaults 

A confirmation window opens  

4.  Click OK 

Why would I need to upgrade my router’s firmware? Linksys may periodically 
publish a firmware upgrade either to fix a problem or to add features to your 
router  

Do not interrupt the upgrade process  You should not turn off the 
router or press the Reset button during the upgrade  Doing so may 
permanently disable the router 

If you are upgrading from a laptop computer, make sure that the 
laptop is connected to a power source or that the battery is fully 
charged 

Disable your computer’s Sleep mode  It might interrupt the 
upgrade process 

If you are upgrading from a computer with a wireless network 
connection, make sure that you have strong wireless signal 
strength  If not, move your computer closer to your router 

Each time you run Cisco Connect, it checks for software updates 
and installs them, if available  Use the following instructions only if 
you don’t run Cisco Connect