Lucent Technologies 9077 04S Manuale Utente

Configuration required on the SP system

SP Switch Router Adapter Guide - 1.4 Update 2

 

2-13

Procedure    

From the SP control workstation, determine the 

switch_node_number

 by entering:

SDRGetObjects  DependentNode  node_number==n

where  

n

 is the 

node_number

 of the dependent node.

This command produces output that looks like:

   node_number  switch_node_number ...

           47           31            ...

From the SP control workstation, determine the host name of the switch primary node by 
entering:

   

   splstdata -s

This command produces output that lists information about nodes on the SP switch. It 
includes the following data and identifies the primary node host name:

   

   switch_port    topology      primary      arp      switch_node

    number        filename       name      enabled     nos._used

   

-----------------------------------------------------------------

       1           top.7        ournode1      no        yes

In this case, the primary node host name is "

ournode1

".      

Log into the primary node by entering:

       tn node_hostname

where 

node_hostname

 is the host name of the primary node. 

From the primary node, enter:

       pg  /var/adm/SPlogs/css/out.top  

Within the 

/out.top

 file, look for the lines containing "

tb3

". 

tb3

 is immediately 

followed by the value for the 

switch_node_number

.

For 

switch_node_number

 31, the following line identifies the SP switch jack 

E02-S17-BH-J15  (Frame 2, switch, bulkhead, jack J15):

       s 27 3  tb3 31 0     E02-S17-BH-J15 to E03-N47  # Dependent Node

If you need help interpreting this identifying string, see the PSSP Maintenance 
Information, Volume 2, Maintenance Analysis Procedures and Parts Catalog for an 
explanation of the naming standard for RS/6000 SP components.