Lucent Technologies 9077 04S Manuale Utente

SP Switch Router Adapter card maint commands

SP Switch Router Adapter Guide - 1.4 Update 2

 

3-15

Each type of media card has a  set of maintenance or maint commands. Some of the 
commands operate on most types of media cards, others are media-specific. 

A small set of the  maint commands provide card-specific status information. The majority of 
maint commands are useful only to system developers. You can use the maint commands 
listed below at any time, they do not interrupt or affect media card operations.

Several maint commands that return useful feedback on card status useful to administrators 
and support staff are:

–

maint 3, Display Configuration and Status 

–

maint 4, Display Media Statistics 

–

maint 5, Display SWITCH Statistics 

–

maint 6, Display Combus Statistics 

–

maint 189 displays the ARP table for the specified interface’s IP address

The SP Switch Router Adapter card has two processors, one on the receive side, one on the 
transmit side. One set of maint commands returns developer-level information and 
information specific to the receive side. A small set of maint commands returns 
developer-level information specific to the transmit side. Commands 81–89 are reserved 
because certain of their effects upon the card can be destructive.

You must start the grrmb program before you can enter a maint command.  

First, start the grrmb program to invoke the GR 66> prompt. From the UNIX shell enter:

# grrmb

The new prompt appears:

GR 66> 

Use the port command to change the prompt number to the slot occupied by the SP Switch 
Router Adapter media card. For example, if the card is in slot 7, enter:

GR 66> port 7

This message is returned along with the changed prompt:

Current port card is 07

GR 07> 

To exit the grrmb program, enter quit:

GR 07> quit

#