MicroNet Technology SP916GK Manuale Utente
- 23 -
23
3.6 Firewall Configuration
Port Filtering
The firewall not only can obstruct outside intruders from intruding your system, but
also restricting the LAN users.
also restricting the LAN users.
Port Filtering can be used to restrict certain type of data packets from your LAN to
Internet through the Router by adding it on the Current Filtering Table.
Internet through the Router by adding it on the Current Filtering Table.
Configuration
1. Click the check box of “Enable Port Filtering” to
enable the function.
2. Enter the Port range (EX 25-110), Protocol
(UDP/TCP), and comment (EX. E-Mail)
STEPS
3. To delete the port range on the list, click the check
box in the select item, and click the “Delete
Selected”. If you want to delete all entries on the
list, click “Delete All” to remove all of them.
Selected”. If you want to delete all entries on the
list, click “Delete All” to remove all of them.
Click <Apply Change> at the bottom of the screen to save the above configurations.
You can now configure other advanced settings or start using the router.
You can now configure other advanced settings or start using the router.