PC Concepts ADSL2+ Manuale Utente

This topic describes how to configure the DHCP server feature on your ADSL/Ethernet 

router. 

 

1.  If the DHCP Server Configuration page is not already displaying, click the LAN tab, and 

then click DHCP Server in the task bar.   

Depending on your pre-configured settings, the table may display up to two address pools, 

each in a row, or may be empty. 

2. Click 

Add. The DHCP Server Pool - Add page displays.   

3.  Enter values for the Start IP Address, End IP Address, and Net Mask fields, which are 

required, and any others as needed:   

z

 

Start/End IP Addresses: Specify the lowest and highest addresses in the pool, up to a 

maximum range of 254 addresses.   

z

 

Mac Address: A MAC address is a manufacturer-assigned hardware ID that is unique 

for each device on a network. Use this field only if you want to assign a specific IP 

address to a specific computer (that is, you are creating an exception to the dynamic 

assignment of addresses). The IP address you specify will be assigned to the computer