Dynalink RTA1320 Manuale Utente
ADSL Router User Manual
Problems with Upgrading
The following lists the error messages that you may see during upgrading and the
action to take.
action to take.
Error message: All the ADSL LEDs light up and cannot light off as usual.
is lost for some unknown reasons,
the normal web page for the router might be damaged. After power on your
router, the LEDs might not work normally.
router, the LEDs might not work normally.
Possible cause: When users are executing firmware upgrade or saving
settings to the router, the power for the router
settings to the router, the power for the router
Action: Setup you PC with a st
access the router’s web page
access the router’s web page
atic IP address, such as 192.168.1.2, and then
by entering
http://192.168.1.1
. Then update the
correct; otherwise download a
of memory.
ssage: Image uploading failed. No image file was selected.
ossible cause: You did not select a file correctly.
the web.
firmware again.
Error Message: Image uploading failed. The selected file contains an illegal
image.
image.
Possible cause: The firmware file format is invalid.
Action: Check to see whether the file format is
firmware file with correct format.
firmware file with correct format.
Error Message: Image uploading failed. The system is out of memory.
Possible cause: It may be caused by the lack
Action: Reboot your ADSL Router and perform the upgrade task again.
Error Me
P
Action: Download a compatible firmware from
122