Dynex DX-E401 Manuale Utente

Set a static IP address if all WAN IP information is provided to you by your ISP. You 
will need to enter in the IP address, subnet mask, gateway address, and DNS 
address(es) provided to you by your ISP. Each IP address entered in the fields must 
be in the appropriate IP form, which are four numbers (up to three digits each) 
separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in 
this format.

1 Open the Configuration menu by following the instructions in To access the 

Web-based configuration utility: on page 13.

MAC Address

The default MAC address is set to the WAN's physical interface MAC address on 
the broadband router. We do not recommend that you change the default MAC 
address unless required by your ISP.

Clone MAC Address

The default MAC address is set to the WAN's physical interface MAC address on 
the broadband router. You can click Clone MAC Address to copy the MAC 
address of your Ethernet card, or you may be required to enter the MAC address of 
your router. We recommend that you do not change the default MAC address 
unless required by your ISP.

Primary/Secondary 
DNS Address

Use this if you do not want to use the one provided by your ISP.

MTU

Use only if required by your ISP. Otherwise, leave the default setting.