Dynex DX-E401 Manuale Utente
Specifications
57
Confirm your computer’s IP configuration
U
SING
IPCONFIG (
FOR
W
INDOWS
XP
AND
W
INDOWS
2000)
To use IPCONFIG:
1 From the Windows Desktop, click
Start
(in the lower left corner of your
screen), click
Run,
then type
cmd
in the box.
The Command Prompt screen
opens.
2 Type
IPCONFIG
at the command prompt, the press
Enter
.
Your computer’s IP information will appear on the screen.
O
BTAINING
A
DYNAMIC
IP
ADDRESS
Residential gateways and broadband routers will automatically assign IP
addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology. If you are using a DHCP-capable gateway or
router you will not need to assign static IP addresses. For more information, see
Selecting a dynamic IP address in Windows XP or Windows 2000 on page 53.
addresses to the computers on the network, using DHCP (Dynamic Host
Configuration Protocol) technology. If you are using a DHCP-capable gateway or
router you will not need to assign static IP addresses. For more information, see
Selecting a dynamic IP address in Windows XP or Windows 2000 on page 53.
A
SSIGNING
A
STATIC
IP
ADDRESS
If you are not using a DHCP-capable gateway or router, you will need to assign a
static IP address to your computer. For more information, see Assigning a static IP
address in Windows XP and Windows 2000 on page 51.
static IP address to your computer. For more information, see Assigning a static IP
address in Windows XP and Windows 2000 on page 51.
Specifications
Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3 Auto Negotiation
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3 Auto Negotiation
VPN pass-through/
multi-sessions
multi-sessions
PPTP
L2TP
IPSec
L2TP
IPSec
Device management Web-based—Internet Explorer 6 or later, Netscape
Navigator 6 or later, or other Java-enabled browsers.
Media access control
CMSA/CA with ACK
LEDs
Power
WAN
LAN (10/100)
WAN
LAN (10/100)