IBM 22P6415 Manuale Utente
Part 8: Notices
1.
You are strongly encouraged to download the latest drivers for your
Wireless LAN clients (e.g. PC Card or USB devices)
Wireless LAN clients (e.g. PC Card or USB devices)
2.
You must use Microsoft Internet Explorer 5.0 or later, or Netscape
Navigator 4.0 or later, when accessing the Web-based setup utility for the
IBM High Rate Wireless LAN Gateway. Internet Explorer can be
downloaded from http://www.microsoft.com/ie or Netscape Navigator
can be downloaded from http://www.netscape.com/download.
Navigator 4.0 or later, when accessing the Web-based setup utility for the
IBM High Rate Wireless LAN Gateway. Internet Explorer can be
downloaded from http://www.microsoft.com/ie or Netscape Navigator
can be downloaded from http://www.netscape.com/download.
3.
No driver or application software CDs or diskettes come with your IBM
High Rate Wireless LAN Gateway. All Gateway configuration is done
through the Web-based setup utility. The default address is
http://192.168.1.1. The default login name is
High Rate Wireless LAN Gateway. All Gateway configuration is done
through the Web-based setup utility. The default address is
http://192.168.1.1. The default login name is
″default″. A password is not
required for the default configuration.
4.
The default ESSID (or network name) for the IBM High Rate Wireless
LAN Gateway is ANY.
LAN Gateway is ANY.
5.
The IBM High Rate Wireless LAN Gateway defaults to be a DHCP server
for LAN and Wireless LAN connected clients.
for LAN and Wireless LAN connected clients.
6.
The IBM High Rate Wireless LAN Gateway default expects the ISP to be
a DHCP server.
7.
If the IBM High Rate Wireless LAN Gateway is not functioning properly,
briefly press the RESET button on the back of the unit. This will restart
the Gateway. If proper function is not resumed, press and hold down the
RESET button for at least five seconds until all the LEDs on the front
panel are turned on. This will restore the Gateway configuration to the
factory defaults. Any settings that you have changed may be lost. If the
Gateway still does not function properly after reset, call the IBM Help
Center.
briefly press the RESET button on the back of the unit. This will restart
the Gateway. If proper function is not resumed, press and hold down the
RESET button for at least five seconds until all the LEDs on the front
panel are turned on. This will restore the Gateway configuration to the
factory defaults. Any settings that you have changed may be lost. If the
Gateway still does not function properly after reset, call the IBM Help
Center.
8.
If you are using a proxy server to access the Internet, it is recommended
that the proxy settings be disabled on the client system before accessing
the IBM High Rate Wireless Gateway Web-based setup utility.
that the proxy settings be disabled on the client system before accessing
the IBM High Rate Wireless Gateway Web-based setup utility.
9.
The IBM High Rate Wireless Gateway operates in the 2.4 GHz frequency
range. Microwaves, Bluetooth devices, and 2.4 GHz cordless phones also
operate in this range and may interfere with the operation of the Gateway.
range. Microwaves, Bluetooth devices, and 2.4 GHz cordless phones also
operate in this range and may interfere with the operation of the Gateway.
10.
Only one client may connect through VPN to a specific VPN server at a
time. For example, only one client can check e-mail on the same secure
server at a time. A client may have different VPN sessions open to
different VPN servers simultaneously.
time. For example, only one client can check e-mail on the same secure
server at a time. A client may have different VPN sessions open to
different VPN servers simultaneously.
© Copyright IBM Corp. 2001
8-1