Planet Technology ADE-3410v2 Manuale Utente

 

 

 
The Router may be reset to the original factory default settings by depressing the reset 
button for a few seconds while the device is powered on. Use a ballpoint or paperclip to 
gently push down the reset button. Remember that this will wipe out any settings stored 
in flash memory including user account information and LAN IP settings. The device 
settings will be restored to the factory default IP address 192.168.1.1 and the subnet mask 
is 255.255.255.0, the default management Username is admin and the default Password is 
admin.  
 

2.5 USB Installation   
 

To connect the DSL router to the PC’s USB port, perform the following:   
Connect the USB cable to the USB port on the DSL router. The cable has two different 
connectors; you may have to try both connectors and the connector is keyed so try 
different orientations.   
Connect the other end of the USB cable into the PC’s USB port. For the USB installation 
on Windows XP, once the PC powers up, a message tips shows Found new hardware on 
the system tray. 

 

 

 

     

Then a dialog window Found New Hardware Wizard pop-up, Select Install the software 
automatically (Recommended) and insert the Manual and Driver CD-Rom. Click <Next>, 

 12