Planet Technology ADE-3410v2 Manuale Utente

ADE-3410V2 also supports pass-through PPPoE sessions from the LAN side while 
simultaneously running a PPPoE client fro non-PPPoE LAN devices. 
 
NAPT and firewall are always enabled when PPPoE mode is selected, but they can be 
enabled or disabled by the user when MER or IPoA is selected, NAPT and firewall are 
always disabled when Bridge mode is selected.   
 
Depending on the network operating mode, and whether NAPT and firewall are enabled 
or disabled, the main panel will display or hide the NAPT/Firewall menu. For instance, at 
initial setup, the default network operating mode is Bridge. The main panel will not show 
the NAPT and Firewall menu.   
 
   
Note: Up to eight PVC profiles can be configured and saved on the flash memory. To 
activate a particular PVC profile, you need to navigate all the Quick Setup pages until the 
last summary page, then click on the Finish button and reboot the system. 
 

 

STEP 1: Click Quick Setup.  
 
STEP 2: Enter the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI). 
Select Enable Quality of Service if required. Click Next.  
 
STEP 3: Then, choose the Encapsulation mode.   
   

 

   

 15