Planet Technology ADE-3410v2 Manuale Utente
5. After clicking Save/Reboot, the router will save the configuration to the flash memory,
and reboot. The Web UI will not respond until the system is brought up again. After the
system is up, the Web UI will refresh to the Device Info page automatically. The
ADE-3410v2 is ready for operation and the LEDs display as described in the LED
description tables.
You may setup your Router manually. The first time you setup the Router it is
recommended that you configure the WAN connection using a single computer making
sure that both the computer and the Router are not connected to the LAN. Once the WAN
connection is functioning properly, you may continue to make changes to Router
configuration including IP settings and DHCP setup. This chapter is concerned with
using your computer to configure the WAN connection. The following chapter describes
the various menus used to configure and monitor the Router including how to change IP
settings and DHCP server setup.
3.2 Preparations before Login ROUTER
Before accessing the ROUTER, make sure that the communications between the PC and
the ROUTER are normal. Check the communications as follows:
Configure the IP address of the PC as 192.168.1.X (2~254), net mask as 255. 255.255.0,
gateway address as 192. 168.1.1 (for customized version, configure them according to the
actual version).
Use “arp –a” under Dos to check if the PC can read out the MAC address of the
ROUTER.
the ROUTER are normal. Check the communications as follows:
Configure the IP address of the PC as 192.168.1.X (2~254), net mask as 255. 255.255.0,
gateway address as 192. 168.1.1 (for customized version, configure them according to the
actual version).
Use “arp –a” under Dos to check if the PC can read out the MAC address of the
ROUTER.
Ping the management IP address (192.168.1.1 by default) of the ROUTER.
If the PC can read out the MAC address of the ROUTER and can ping through the
management IP address of the ROUTER, that means the communications of the PC and
the ROUTER are normal.
If the PC can read out the MAC address of the ROUTER and can ping through the
management IP address of the ROUTER, that means the communications of the PC and
the ROUTER are normal.
Note that when you manage the ROUTER through WEB, you must keep the ROUTER
power on, otherwise you may damage the ROUTER
power on, otherwise you may damage the ROUTER
.
3.3 Logging on the ROUTER
Open IE or Netscape Web browser, and input “http://192.168.1.1” (ROUTER default IP
address).
Connect to the ROUTER. The ROUTER will require a username and a password.
The default super username and password are “admin” and “admin”.
The default common username and password are “user” and “user”.
address).
Connect to the ROUTER. The ROUTER will require a username and a password.
The default super username and password are “admin” and “admin”.
The default common username and password are “user” and “user”.
18