Planet Technology ADE-3410v2 Manuale Utente
If you select “Remote” or “Both”, all events will be transmitted to the specified
UDP port of the specified log server.
UDP port of the specified log server.
After operations under “Configure System Log”, click “View System Log” to
query the system logs. In this example, the “View System Log” is a system
default one.
Note: The log and display of the system events are above the set level. If you
intend to record all information, you need to set the levels as “Debugging”.
query the system logs. In this example, the “View System Log” is a system
default one.
Note: The log and display of the system events are above the set level. If you
intend to record all information, you need to set the levels as “Debugging”.
Click “Refresh” to refresh the system event logs or “Close” to exit from this
interface.
interface.
3.7.3 Internet Time
Click the “Internet Time”, the interface show you. In this page, the ROUTER can
synchronize with Internet time servers.
synchronize with Internet time servers.
After enable “Automatically synchronize with Internet time servers”, the interface shows
below. Enter proper configurations, and then click “Save/Apply”.
below. Enter proper configurations, and then click “Save/Apply”.
3.7.4 Access Control
3.7.4.1 Access Control – Services
Click “Access Control”-->”Services” to show the following interface. In the interface,
50