Rosewill RNWB-11001 Manuale Utente

 

Figure 4-24 Wireless Advanced 

¾

 

Transmit Power - Here you can specify the transmit power of Router. You can 

select High, Middle or Low which you would like. High is the default setting and is 

recommended. 

¾

 

Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval 

here. The beacons are the packets sent by the Router to synchronize a wireless 

network. Beacon Interval value determines the time interval of the beacons. The 

default value is 100.   

¾

 

RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the 

packet is larger than the specified RTS Threshold size, the Router will send RTS 

frames to a particular receiving station and negotiate the sending of a data frame. 

The default value is 2346.   

¾

 

Fragmentation Threshold - This value is the maximum size determining whether 

packets will be fragmented. Setting the Fragmentation Threshold too low may result 

in poor network performance because of excessive packets. 2346 is the default 

setting and is recommended.   

¾

 

DTIM Interval - This value determines the interval of the Delivery Traffic Indication 

Message (DTIM). A DTIM field is a countdown field informing clients of the next 

window for listening to broadcast and multicast messages. When the Router has 

buffered broadcast or multicast messages for associated clients, it sends the next 

DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon 

-62-