Rosewill RNWB-11001 Manuale Utente

 

Figure 4-56    Add or Modify a Static Route Entry 

2.  Enter the following data. 

¾

 

Destination IP Address  - The Destination IP Address is the address of the 

network or host that you want to assign to a static route. 

¾

 

Subnet Mask - The Subnet Mask determines which portion of an IP Address is 

the network portion, and which portion is the host portion. 

¾

 

Gateway  - This is the IP Address of the gateway device that allows for contact 

between the Router and the network or host. 

3. Select 

Enabled or Disabled for this entry on the Status drop-down list. 

4. Click 

the 

Save button to make the entry take effect. 

Click the Delete button to delete the entry. 

Click the Enable All button to enable all the entries. 

Click the Disable All button to disable all the entries. 

Click the Delete All button to delete all the entries. 

Click the Previous button to view the information in the previous screen, click the Next 

button to view the information in the next screen. 

Choose menu “Advanced Routing → System Routing Table”, and then you can view the 

System Routing Table in the next screen (shown in Figure 4-57). System routing table 

-91-