RCA 360 Manuale Utente
4 Support
E-DOC-CTC-20031204-0011 v2.0
48
4
The Setup wizard should find your SpeedTouch™ device on the local network.
This is indicated by the following window:
This is indicated by the following window:
If more than one device is found, a list of available devices will be provided. If this
is the case, select your SpeedTouch™ device (SpeedTouch™350 or Speed-
Touch™360) and click Next.
is the case, select your SpeedTouch™ device (SpeedTouch™350 or Speed-
Touch™360) and click Next.
Note
If the wizard does not find any SpeedTouch™ on the network an error
window appears. In this case check that:
window appears. In this case check that:
•
The SpeedTouch™ is turned on and fully initialized.
•
Your PC is correctly connected to the SpeedTouch™.
•
Your PC has a valid IP address (i.e. any IP address but 0.0.0.0).
•
No dedicated firewall device or router is placed between your
PC and the SpeedTouch™
PC and the SpeedTouch™
•
No personal firewall software is running on your PC.
•
TCP/IP is correctly installed on your PC
5
To repeat the search for your SpeedTouch™, click Back and proceed with step
of this procedure.
6
Click Next.
7
The following window shows the system software version currently active on the
SpeedTouch™ as well as one or more system software versions available on the
CD-ROM:
SpeedTouch™ as well as one or more system software versions available on the
CD-ROM:
Select the appropriate system software version and click Next to continue.
Note
If the Service Provider has included a separate disk with dedicated
upgrade system software, click Have Disk to navigate to the location of
the appropriate file.
upgrade system software, click Have Disk to navigate to the location of
the appropriate file.
Note
In case of a system software downgrade you must specifically acknowl-
edge your decision before being able to proceed.
edge your decision before being able to proceed.